For Takahashi EM-400 Mounts

This may also fit some other Takakashi mounts with the round legs (2.46" outside diameter). You will need to unscrew the set screw and remove the "foot" from the leg. The bottom of the leg assembly looks like this:

This is a sleeve design that uses three bolts to tighten it to the leg. The bolts actually tighten on a brass compression ring, to avoid marring the finish of the leg.

ScopeRoller TakEM400 Deluxe

ScopeRoller TakEM400 Deluxe Set Installed

ScopeRollerTM TakEM400 Deluxe

DISCONTINUED: Machining the channel in which the brass compression ring sits is just too much work. I don't need the money this badly.